Page 2 of 4
Brake Bleed Nipple 10mm Short Stainless Steel SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL Dimensions: 10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip. 5 in stock £8.20 INC VAT £6.83 EX VAT
Brake Bleed Nipple 8mm Stainless Steel SSA01659 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, V85TT Dimensions: M8 x 1.25 standard thread, 10mm threaded shank, 16mm from tip to underside of flats A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230 4 in stock 01659230 GU01659230 01 65 92 30 0165 9230 0165.9230 01.65.92.30 £6.10 INC VAT £5.08 EX VAT
Brake Light Switch ELA30749 Fits Cali EV (2002-2008), Cali Classic, Cali Vintage, Cali Aquila Nera, Nevada 750 (2004-2016), 1200 Sport, Bellagio, Breva ALL, Griso ALL, Norge ALL, Stelvio, V7 Classic, V7 Racer, V7 Stone, V7 Special, V7 II ALL, V7 III ALL, V9 ALL Dimensions: 29mm x 24mm x 12mm excluding switch and spade connectors Brakelight switch Stop light switch also known as Guzzi ref. AP8224192 See FRA98412 for mounting screw 3 in stock 03749845-z 03749845 GU03749845 03 74 98 45 0374 9845 0374.9845 03.74.98.45 £15.50 INC VAT £12.92 EX VAT
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover 3 in stock
£26.50 INC VAT £22.08 EX VAT
Single Banjo Bolt M10 Stainless Steel Kit Fine Thread BRA01001 Universal Part Dimensions: M10 x 1 Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers Supplied with 4 crush washers. Also known as Guzzi ref. 95990033 2 in stock 95990028-z 95990028 GU95990028 95 99 00 28 9599 0028 9599.0028 95.99.00.28 Also fits Laverda Jota £8.40 INC VAT £7.00 EX VAT
Brake Caliper Mounting Bolt BRA14556 Fits Breva ALL, 1200 Sport (2v/cyl), Norge ALL, V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, Nevada 750 (2004-2013) Dimensions: M10 x 28mm Mounting bolt for brake caliper, bolts caliper to fork leg. Supplied in zinc finish. 2 in stock AP8152385 £5.98 INC VAT £4.98 EX VAT
Front Brake Caliper Overhaul Kit Brembo Goldline P30/34 BRA19723 Fits Nevada 750 (2003-2016), V7 I ALL, V7 II ALL, V7 III ALL, Breva ALL, Griso 1100, Norge ALL, Cali Vintage, Cali EV (1997-2009), Cali Sport (2001-2003), 1200 Sport, V11 Sport, Daytona, 1100 Sport, Cali Jackal, Cali Stone Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper.
Also suitable for some Ducati / Aprilia models. Caliper seal kit 2 in stock £34.00 INC VAT £28.33 EX VAT
Automatic Bleed Valve M8 Bleed Nipple BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone Dimensions: M8 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above. 2 in stock
£26.50 INC VAT £22.08 EX VAT
Universal Brake Light Switch Single Banjo Fine Thread Stainless Steel BRA01004 Universal Part Dimensions: M10 single banjo fine thread Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060 1 in stock £29.50 INC VAT £24.58 EX VAT
Brembo Pad Pin Kit P4 BRA01330 Fits V11 Sport ALL, Cali EV (2001-2006), Cali Jackal, Cali Aquila Nera, Cali Vintage, Cali Sport, Cali 1400 ALL, Breva ALL, Norge ALL, Griso ALL, Stelvio, 1200 Sport, V7 Classic, V7 Cafe, Nevada 750 (2002-2015), V7 II, V7 III ALL, V9 ALL, V85TT, V7 850 ALL Brembo pad pin kit for Brembo P4 30/34F calipers fitted to front forks, two pins Brembo ref. 120394230 1 in stock 01659130 GU01659130 01 65 91 30 0165 9130 0165.9130 01.65.91.30 £23.00 INC VAT £19.17 EX VAT
Page 2 of 4
|